Free running Arpeggiator. (Note this module is V1.5 only)
This arpeggiator is free-running (not locked to the host DAW’s tempo)
Note: Don’t be tempted to use the MIDI-CV2 module on the input of this structure as well as the output. You’ll get a feedback loop warning!
Trigger: The trigger ‘input’ is used to reset the Arpeggiator so it always starts in the correct position.
Gate: The gate ‘input’ is used to ensure that the clock signal is only received by the arpeggiator whilst one or more keys are held down.
Mode: The Arpeggiator mode is a list of off, up, down, up/down and random.
Octaves: Selects the number of octaves that the arpeggiator’s output will cover.
ED DSP Timer: The timings are in mS so we will need to do some maths to convert this to a readout.
Just connect the MIDI-CV 2 module up to a Synth as normal. It should be a Monophonic synth.
BPM Syncing the Arpeggiator to the host DAW.
This is quite a simple modification, we just need to connect up the BPM Clock 4 module as shown. Again the output is simply connected to a Monophonic Synthesizer.
Note: The tempo selection only works correctly when the structure is converted to a VST, and is running inside the host DAW, it will not operate inside SynthEdit.
Leave a Reply